• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Nail anchor FNA II RB
  • Product Picture: "fischer Nail anchor FNA II 6 x 30/30 R RB stainless steel (50pcs.)"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
    • Application Picture
      Broj artikla 530674

      fischer Nail anchor FNA II 6 x 30/30 R RB stainless steel (50pcs.)

      Produkt varijante
      Download of image data
      Top Features
      • Easy removal of fire protection plates without damage These can be reused.
      • Secure fixing, even when exposed to vibration, wind, and pushing/pulling effects.
      • Low anchorage depth saves time and costs.
      • Simple assembly with hammer or compressed air setting device.
      • Test certificates from RTW and ZWS.

      Prednosti / opis proizvoda

      The removable anchoring solution for demanding fixings.
      Advantages
      • The special active principle allows for a simple hammerset installation and therefore a short processing time.
      • The extremely short anchor depth prevents reinforcement hits and creates the conditions for a trouble-free installation.
      • The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations.
      • The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
      The fischer nail anchor FNA II RB is a fastening element made of stainless steel for fastening fire protection boards and for multiple fixing of other non-load-bearing systems. The nail anchor is set in the time-saving through-type installation. After creating the drill hole, the nail anchor is driven in with a few taps of the hammer, or is set using a compressed air setting device. The large, pre-assembled washer increases the pulling forces considerably and prevents damaging the board during removal. The nail head is taken off with special pliers for removal.

      Upotreba i atesti

      Applications
      • Fire protection plates
      • Fire protection boards
      • Ventilation systems
      • Wire and Nonius hangers
      • Mounting rails
      • Metal clamps
      • Substructures made of wood and metal
      Building materials
      Approved for:
      • Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
      Also suitable for:
      • Solid sand-lime brick
      • Natural stone with dense structure
      • Prestressed hollow-core concrete slabs
      Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
      Atesti
      • ETA-06/0175
      • DoP No. 0235
      • GS 6.1/21-076-1

      Uputstva za montažu

      Functionality
      • The FNA II with nail head is suitable for push-through installation.
      • The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the hole wall.
      • Available setting tools:
        FNA S-SBO for attachment to drill
        FNA S-SDS for series installation with a hammer drill
        FNA S-H for the manual installation of mounting rails
      Mounting Strip 1 Picture
      1 / 5
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 4
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      • 4
        Mounting Strip 2 Picture

      Tehnički podaci

      Anchor length (
      l
      )      		68 mm
      Drill diameter (
      d0
      )      		6 mm
      Min. drill hole depth for through fixings (
      h2
      )      		66 mm
      Min. drill hole depth for pre-positioned installation (
      h1
      )      		36 mm
      Min. effect. anchorage depth (
      hef
      )      		30 mm
      Max. fixture thickness (
      t fix
      )      		30 mm
      Packaging Folding box
      Amount 50 pcs.
      GTIN (EAN-Code) 4048962204612

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-06/0175
      European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete
      izdato 02. 03. 2021.
      DOP - Declaration of Performance
      pdf, DoP No. 0235
      Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)
      izdato 16. 03. 2021.
      Test report (fire protection)
      pdf, GS 6.1/21-076-1
      Assessment of the load-bearing behaviour of fischer nail anchors FNA II R and FNA II HCR under tension load and one-sided fire loading according to the ZTV-ING-curve
      izdato 05. 10. 2021.
      Load Table
      pdf,
      Nail anchor FNA II RB - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60
      cd-green-58bb58464c-46z77