The installation-friendly hammerset anchor for multiple fixings.

Nail anchor FNA II M6 with thread and flange nut

The fischer nail anchor FNA II M6 with thread and flange nut is made from zinc-plated, stainless, and highly corrosion-resistant steel. The nail anchor is primarily suitable for the anchoring of ventilation systems and mounting rails. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA II M6 is set in a few hammer blows in a time-saving push-through and pre-positioned installation. Torque-controlled tightening is not required. This saves time. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Termékváltozat

Download of image data

Termékváltozat

Engedélyek / vizsgálati jelentések

7 termékváltozat

Anchor length

Drill diameter

Min. drill hole depth for through fixings

Max. fixture thickness

Thread

Width across nut

Jelmagyarázat = Van engedély— = Nincs engedély

A (z) 7 változatok 7 megtekintése

Advantages

Easy removal of fire protection board without damage.
Reusability of fire protection board.
Safe anchorage, particularly when exposed to vibration, wind, and pushing/pulling influences.
Low anchoring depth (30 mm).
Convenient installation without torque-controlled setting tool.
Approved system that has proven itself one million times over.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and Nonius hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Concrete C12/15 to C50/60, cracked and non-cracked
For multi-point fixings of non-load-bearing systems

Az adott esetben elérhető engedélyben szereplő adatok (építőanyagok, terhelések stb.) érvényesek. További dokumentumok itt találhatók: https://www.fischer.de/sdb.

Engedély

ETA-06/0175
DoP No. 0235
2006-Efectis-R0560
2006-CVB-R0559
2006-Efectis-R0561
GS 6.1/21-076-1

Functionality

The washer significantly increases the pulling forces and, at the same time, prevents the damage of the panel during removal.
Removal by means of easy pinching off of nail head thanks to special 2-stage pliers.
For fast installation, use the compressed air setting device (item no. 093731).

Mounting Strip 1 Picture

1 / 4

Mounting Strip 2 Picture

1 / 4

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Készült 02. 03. 2021.

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Készült 16. 03. 2021.

Test report (fire protection)

pdf, 2006-Efectis-R0560

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 RVS A4)

Készült 01. 11. 2006.

Test report (fire protection)

pdf, 2006-CVB-R0559

fischer anchors, type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

Készült 01. 11. 2006.

Test report (fire protection)

pdf, 2006-Efectis-R0561

fischer anchor type FNA II 6 x 30 M6 A4 or type FNA II 6 x 30 A4 (Aisi 316 rvs A4)

Készült 01. 11. 2006.

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Készült 05. 10. 2021.

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Rendszerelemek

Hasonló termékkategóriák

ETA-approval
Anchor length ( l )	45 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441114

ETA-approval
Anchor length ( l )	55 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209460221

ETA-approval
Anchor length ( l )	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441091

ETA-approval
Anchor length ( l )	51 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M8
Width across nut	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441145

ETA-approval
Anchor length ( l )	50 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441121

Nail anchor FNA II M6 with thread and flange nut

Termékváltozat

Előnyök / Termékismertető

Használat és engedély

Szerelési útmutató

Letölthető dokumentumok

ETA-approval
Anchor length ( l )	41 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness	—
Thread ( M )	M6
Width across nut	10 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441107