The undercut anchor for thin fibre cement façade panels by Equitone.

Zykon panel anchors FZP II T PA Tergo+

The undercut anchor for a concealed fixing of EQUITONE fibre cement panels. Use in conjunction with clasp systems or with other attachments.
Produkt varijanteDownload of image data

Produkt varijante

Filter
Filter
Atesti / izvješća testova
7 produkt varijanti
Min. panel thickness
Total length
Thread
Cylindrical diameter
Undercutdiameter
Contents
Legenda = Posjeduje atest = Ne posjeduje atest
Pregledano 7 od 7 verzija

Prednosti / opis proizvoda

Advantages
  • The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
  • The fixing is not externally visible, creating a visually appealing façade surface.
  • The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
  • Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
  • The anchor allows higher failure loads compared to common systems.
  • This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Upotreba i atesti

Applications
For high aesthetical requrements:
  • The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.
Building materials
  • Equitone fibre cement (>8mm)
Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.

Uputstva za montažu

Functionality
  • dry drilling in fibre cement
  • the drill hole is drilled with an absolute anchoring depth
  • flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
  • drilling: first cylindrical, then conical - to create the undercut.
  • inserting the undercut anchor in the cylindrical-conical undercut hole
  • expanding the undercut anchor by "pressing down" the washer using the setting tools
  • stress-free and geometrical inter-locking fixing
Mounting Strip 1 Picture
1 / 4
cd-green-58bb58464c-mbzdk