• Proizvodi
  • Usluge
  • fischer group
  • Kontakt
Anchor rod/Internal thread anchor
  • Product Category Picture: "Internal threaded sockets FIS E"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
      The internal threaded anchor for masonry and aerated concrete.

      Internal threaded sockets FIS E

      The fischer internal threaded anchor FIS E is a system component for use with the fischer injection mortars FIS V, FIS VL, FIS P Plus or FIS P for fixations in masonry made from solid brick, perforated brick, and aerated concrete. When the threaded anchor is installed, the mortar is pressed through the grating structure and creates a form fit with the structure of the brick. The metric internal thread enables the use of conventional metric screws or threaded rods. The internal threaded anchor is suitable for surface-flush removal, and the fixing point can be reused. This means that the FIS E is particularly suited to detachable and temporary fixings both inside and outside. The approvals of the various injection mortars must be observed.
      Produkt varijante
      Download of image data

      Produkt varijante

      Filter
      Filter
      Atesti / izvješća testova
      6 produkt varijanti
      Drill diameter
      Thread
      Contents
      Packaging
      Amount
      GTIN (EAN-Code)
      Legenda = Posjeduje atest— = Ne posjeduje atest
      Pregledano 6 od 6 verzija

      Prednosti / opis proizvoda

      Advantages
      • The internal threaded anchor FIS E is suitable for use with injection mortar in masonry or aerated concrete.
      • The internal threaded anchor FIS E allows for surface-flush removal and the reuse of the fixing point, and therefore offers the best possible flexibility.
      • The metric internal thread allows for the use of standard metric screws or threaded rods, which enables ideal adaptation in line with the intended use.
      • Please refer to the approvals for the mortar used.

      Upotreba i atesti

      Applications
      • Removable and temporary fixings
      • Anchorings with the injection mortars FIS V, FIS VL, FIS P Plus or FIS P in masonry and aerated concrete
      Building materials
      Approved for:
      • Solid sand-lime brick
      • Perforated sand-lime brick
      • Solid brick
      • Solid blocks made from lightweight concrete
      • Vertically perforated brick
      • Hollow blocks made from lightweight concrete
      • Building brick
      • Aerated concrete blocks
      Suitable for:
      • Solid and lightweight concrete blocks
      • Solid pumice and other solid building materials
      Primjenjuju se pojedinosti (građevinski materijali, opterećenja itd.) bilo kojeg dostupnog odobrenja. Dodatne dokumente možete pronaći u Download Center.
      Atesti
      • ETA-15/0263
      • ETA-10/0383
      • ETA-20/0729
      • DoP No. 0195
      • DoP No. 0189
      • DoP No. 0354

      Uputstva za montažu

      Functionality
      • The system can be used with any of the following injection mortars: FIS V, FIS VS, FIS VW, FIS VL or FIS P can be used but do not have approvals.
      • FIS E is suitable for pre-positioned installation.
      • The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
      • The anchor is set manually, by lightly rotating it until it reaches the drill hole base.
      Mounting Strip 1 Picture
      1 / 7
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture

      Dokumenti za preuzimanje

      ETA Certification Document
      pdf, ETA-15/0263
      European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry
      izdato 07. 07. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0195
      Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)
      izdato 04. 08. 2020.
      ETA Certification Document
      pdf, ETA-10/0383
      European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry
      izdato 07. 07. 2020.
      DOP - Declaration of Performance
      pdf, DoP No. 0189
      Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)
      izdato 21. 07. 2019.
      ETA Certification Document
      pdf, ETA-20/0729
      European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry
      izdato 03. 02. 2025.
      DOP - Declaration of Performance
      pdf, DoP No. 0354
      Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)
      izdato 14. 11. 2023.
      Load Table
      pdf,
      Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A - Highest permissible loads for a single anchor in solid brick masonry for pre-positioned or push-through installation. / Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A5 and anchor sleeve FIS H..K. - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation. / Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A resp. internal threaded socket FIS E - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation. / Injection system FIS V with threaded rod FIS A resp. internal threaded socket FIS E and anchor sleeve FIS H..K. - Highest permissible loads for single anchor in solid brick masonry for pre-positioned installation.
      cd-blue-c6785f99-s8hkv